Registrieren Sie sich für das Dlubal-Extranet, um die Software optimal nutzen zu lassen und ausschließlichen Zugriff auf Ihre persönlichen Daten zu haben.
Eine aus einem I-Profil bestehende Struktur ist in Gabellager eingebettet. The axial rotation is restricted on both ends while warping is enabled. The structure is loaded by two transverse forces in the middle. The verification example is based on the example introduced by Gensichen and Lumpe.
Das Verifikationsbeispiel beschreibt Windlasten aus mehreren Anströmrichtungen am Modell einer Gebäudegruppe. The model consists of eight cubes. The velocity fields obtained by the RWIND simulation are compared with the measured values from the experiment. The experimental data are measured using a thermistor anemometer in the wind tunnel.
Das vorliegende Verifikationsbeispiel beschreibt Druckbelastungen an den Wänden von Gebäuden in Tandemanordnung, die sich in Bodennähe befinden. The buildings are simplified to rectangular objects and scaled down while maintaining the elevation ratios. The pressure distribution on the walls of the model of a medium-high building was conducted by an experiment. The chosen results (pressure coefficient Cp) are compared with the measured values.
Das Verifikationsbeispiel beschreibt die stationäre Umströmung an einem isolierten Gebäude (skaliertes Modell) am Beispiel von Architectural Institute of Japan (AIJ). The chosen results (velocity magnitude) are compared with the measured values.
This verification example compares wind load calculations on a duopitch roof building using the ASCE 7-16 standard and using CFD simulation in RWIND Simulation. Das Gebäude wird anhand der Skizze und des in der Norm ASCE 7-16 enthaltenen Anströmgeschwindigkeitsprofils definiert.
This verification example compares wind load calculations on a flat roof building using the ASCE 7-16 standard and using CFD simulation in RWIND Simulation. Das Gebäude wird anhand der Skizze und des in der Norm ASCE 7-16 enthaltenen Anströmgeschwindigkeitsprofils definiert.
A simply supported beam is loaded by pure bending. Aufgrund des Biegeknickens versuchen Sie die Verzweigungslast und den zugehörigen Lastfaktor zu ermitteln.
Dieses Verifikationsbeispiel basiert auf dem Verifikationsbeispiel 0122. A single-mass system without damping is subjected to an axial loading force. An ideal elastic-plastic material with characteristics is assumed. Determine the time course of the end-point deflection, velocity, and acceleration.
Eine symmetrische flache Struktur besteht aus acht gleichen Fachwerkstäben, die in Gelenklagern eingebettet sind. The structure is loaded by a concentrated force and alternatively by imposed nodal deformation over the critical limit point when the snap-through occurs. Imposed nodal deformation is used in RFEM 5 and RSTAB 8 to obtain the full equilibrium path of the snap-through. The self-weight is neglected in this example. Determine the relationship between the actual loading force and the deflection, considering large deformation analysis. Evaluate the load factor at the given deflections.
A cable is loaded by means of a uniform load. Das hat eine deformierte Form in Gestalt von einem Kreissegment zur Folge. Determine the equilibrium force of the cable to obtain the given sag of the cable. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.