Eine symmetrische flache Struktur besteht aus acht gleichen Fachwerkstäben, die in Gelenklagern eingebettet sind. The structure is loaded by a concentrated force and alternatively by imposed nodal deformation over the critical limit point when the snap-through occurs. Imposed nodal deformation is used in RFEM 5 and RSTAB 8 to obtain the full equilibrium path of the snap-through. The self-weight is neglected in this example. Determine the relationship between the actual loading force and the deflection, considering large deformation analysis. Evaluate the load factor at the given deflections.
Eine kugelförmige Ballonmembran wird mit Gas mit Atmosphärendruck und definiertem Volumen gefüllt (diese Werte werden nur für die FE-Modelldefinition verwendet). Determine the overpressure inside the balloon due to the given isotropic membrane prestress. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.
Eine Struktur besteht aus vier Fachwerkstäben, die in Gelenklagern eingebettet sind. The structure is loaded by a concentrated force and alternatively by imposed nodal deformation over the critical limit point, when snap-through occurs. Imposed nodal deformation is used in RFEM 5 and RSTAB 8 to obtain the full equilibrium path of the snap-through. The self-weight is neglected in this example. Determine the relationship between the actual loading force and the deflection, considering large deformation analysis. Evaluate the load factor at given deflections.
Berücksichtigen Sie die im Bild Nr.1 dargestellte Stabspannweite ASTM A992 W 18 × 50 und die gleichmäßigen Eigen- und Nutzlasten. The member is limited to a maximum nominal depth of 18 inches. The live load deflection is limited to L/360. The beam is simply supported and continuously braced. Verify the available flexural strength of the selected beam, based on LRFD and ASD.
Ein gekrümmter Träger besteht aus zwei Trägern mit rechteckigem Querschnitt. The horizontal beam is loaded by distributed loading. While neglecting self-weight, determine the maximum stress on the top surface of the horizontal beam.
Ein dünnwandiges Kugelgefäß wird durch Innendruck belastet. While neglecting self‑weight, determine the von Mises stress and the radial deflection of the vessel.
Ein Kragarm mit einem kreisförmigen Querschnitt wird durch konzentrierte Biege- und Drehkraft belastet. The aim of this verification example is to compare the reduced stress according to the von Mises and Tresca theories.
A two-layered, open-ended, thick-walled vessel is loaded by inner and outer pressure; therefore, there is no axial stress. Es wird die radiale Durchbiegung von Innen- und Außenradius sowie der Druck (radiale Spannung) ermittelt, wobei das Eigengewicht nicht berücksichtigt wird.
A compact disc (CD) rotates at a speed of 10,000 rpm. Sie ist daher einer Fliehkraft ausgesetzt. The problem is modeled as a quarter model. Determine the tangential stress on the inner and outer diameters and the radial deflection of the outer radius.
Stellen wir uns ein biegesteifes Gerüstrohr vor, das durch einen Knotenlager für Gerüst unten befestigt und sowohl durch ein Moment als auch durch eine Kraft belastet wird. Calculate the maximum radial deflection by exceeding the capacity of the scaffolding support.
Vier Stützen sind unten fixiert und oben durch einen starren Block verbunden. The block is loaded by pressure and modeled by an elastic material with a high modulus of elasticity. The outer columns are modeled by linear elastic material and the inner columns by a stress-strain diagram with decaying dependence. Assuming only the small deformation theory and neglecting the structure's self-weight, determine its maximum deflection.
Eine breite Platte mit Öffnung wird mittels Zugspannung in einer Richtung belastet. The plate width is large with respect to the hole radius, and it is very thin, considering the state of the plane stress.