Registrieren Sie sich für das Dlubal-Extranet, um die Software optimal nutzen zu lassen und ausschließlichen Zugriff auf Ihre persönlichen Daten zu haben.
Dieses Verifikationsbeispiel basiert auf dem Verifikationsbeispiel 0122. A single-mass system without damping is subjected to an axial loading force. An ideal elastic-plastic material with characteristics is assumed. Determine the time course of the end-point deflection, velocity, and acceleration.
Eine symmetrische flache Struktur besteht aus acht gleichen Fachwerkstäben, die in Gelenklagern eingebettet sind. The structure is loaded by a concentrated force and alternatively by imposed nodal deformation over the critical limit point when the snap-through occurs. Imposed nodal deformation is used in RFEM 5 and RSTAB 8 to obtain the full equilibrium path of the snap-through. The self-weight is neglected in this example. Determine the relationship between the actual loading force and the deflection, considering large deformation analysis. Evaluate the load factor at the given deflections.
Eine Struktur besteht aus vier Fachwerkstäben, die in Gelenklagern eingebettet sind. The structure is loaded by a concentrated force and alternatively by imposed nodal deformation over the critical limit point, when snap-through occurs. Imposed nodal deformation is used in RFEM 5 and RSTAB 8 to obtain the full equilibrium path of the snap-through. The self-weight is neglected in this example. Determine the relationship between the actual loading force and the deflection, considering large deformation analysis. Evaluate the load factor at given deflections.
Ein gekrümmter Träger besteht aus zwei Trägern mit rechteckigem Querschnitt. The horizontal beam is loaded by distributed loading. While neglecting self-weight, determine the maximum stress on the top surface of the horizontal beam.
Am oberen Ende ist ein Stab mit quadratischem Querschnitt befestigt. The rod is loaded by self-weight. For comparison, the example is also modeled with the concentrated force load, the value of which is equal to the gravity. The aim of this verification example is to show the difference between these types of loading, although the total loading force is equal.
Dieses Beispiel dient zur Veranschaulichung der Ebene. The application is shown on a two-story structure. The structure is loaded by means of lateral forces according to Figure 1. Determine the maximum deflection of the structure ux in the direction of the loading forces using both the diaphragm constraint and the plate model of the floor.
In diesem Beispiel soll der nicht umkehrbare Prozess aufgezeigt werden, der durch Reibung verursacht wird. After the loading and unloading, the end-point is in a different position than where it was at the beginning. Determine the movement of the node in the X direction.
Eine Verbundplatte, die aus drei Glasschichten einer Folienschicht und einem Innenraum mit trockener Luft besteht, ist vollständig befestigt und mit einer variablen Temperatur belastet. Neglecting its self-weight, determine the plate's maximum deflection.
Es soll die maximale Verschiebung, die Spannungen in der Ebene und die Spannungsverhältnisse einer einfach gelagerten Doppelscheibenglasplatte mit einer Folie zwischen den beiden Glasscheiben unter konstantem Druck bestimmt werden.
Bestimmen Sie die maximale Durchbiegung des Kragarms aus zwei Glasscheiben und einer dazwischenliegenden Folienschicht. The plate is fully fixed at one end and subjected to uniform pressure.
Bestimmen Sie das Biegemoment, welches den Stab am freien Ende des Kragarms in eine kreisförmige Form biegt. Neglecting the beam's self-weight, assuming the large deformation analysis, and loading the cantilever with the moment, determine its maximum deflections.
Eine Struktur besteht aus zwei Fachwerkträgern, die in die Gelenklager eingebettet sind. The structure is loaded by concentrated force. The self-weight is neglected. Determine the relationship between the loading force and the deflection, considering large deformations.
Bestimmen Sie die maximale Durchbiegung und Spannung in z-Richtung von einer unter konstantem Druck befindlichen Verbundplatte, die aus zwei Glasschichten und einer dazwischenliegenden Folienschicht besteht.