Eine aus einem I-Profil bestehende Struktur ist in Gabellager eingebettet. The axial rotation is restricted on both ends while warping is enabled. The structure is loaded by two transverse forces in the middle. The verification example is based on the example introduced by Gensichen and Lumpe.
Ein ebener Fachwerkträger aus vier geneigten Stäben und einem vertikalen Stab wird am oberen Knoten mit der Vertikalkraft und einer außerhalb der Ebene liegenden Kraft belastet. Assuming the large deformation analysis and neglecting the self-weight, determine the normal forces of the members and the out-of-plane displacement of the upper node.
Eine Membran wird anhand isotroper Vorspannung zwischen zwei Radien von zwei konzentrischen Zylindern gedehnt, die nicht in einer Ebene parallel zur vertikalen Achse liegen. Find the final minimum shape of the membrane - the helicoid - and determine the surface area of the resulting membrane. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.
Ein gedämpftes Einmassensystem wird einer konstanten Lastkraft ausgesetzt. Determine the spring force, damping force, and inertial force at the given test time. In this verification example, the Kelvin--Voigt dashpot (namely, a spring and a damper element in serial connection) is decomposed into its purely viscous and purely elastic parts, in order to better evaluate the reaction forces.
Ein gekrümmter Träger besteht aus zwei Trägern mit rechteckigem Querschnitt. The horizontal beam is loaded by distributed loading. While neglecting self-weight, determine the maximum stress on the top surface of the horizontal beam.
Ein Seil in Ausgangsstellung wird durch zwei punktuelle Kräfte belastet. The self‑weight is neglected. Determine the normal forces in the cable.
Ein Stahlstab zwischen zwei starren Lagern mit einem Abstand wird durch eine Temperaturdifferenz belastet. While neglecting self‑weight, determine the total deformation of the rod and its internal axial force.
Dieses Beispiel dient zur Veranschaulichung der Ebene. The application is shown on a two-story structure. The structure is loaded by means of lateral forces according to Figure 1. Determine the maximum deflection of the structure ux in the direction of the loading forces using both the diaphragm constraint and the plate model of the floor.
An beiden Enden ist ein dreidimensionaler Block aus elastisch-plastischem Material mit Verfestigung befestigt. The block's middle plane is subjected to a pressure load. The surface plasticity is described according to the Tsai‑Wu plasticity theory.
Weisen Sie nach, dass die Ergebnisse durch die Kopplung unterschiedlicher dimensionaler Elemente nicht beeinflusst werden. A cantilever with a rectangular cross-section is fixed at one end and loaded at the other by concentrated forces. Neglecting its self-weight and assuming only small deformations, determine the cantilever's maximum deflections.