Registrieren Sie sich für das Dlubal-Extranet, um die Software optimal nutzen zu lassen und ausschließlichen Zugriff auf Ihre persönlichen Daten zu haben.
Ein ebener Fachwerkträger aus vier geneigten Stäben und einem vertikalen Stab wird am oberen Knoten mit der Vertikalkraft und einer außerhalb der Ebene liegenden Kraft belastet. Assuming the large deformation analysis and neglecting the self-weight, determine the normal forces of the members and the out-of-plane displacement of the upper node.
Ein W-förmiger Stab gemäß ASTM A992 wurde ausgewählt, um unter Zugbeanspruchung die Eigenlast von 30.000 kips (13,6 t) und eine Verkehrslast von 90.000 kips (40,8 t) zu tragen. Verify the member strength using both LRFD and ASD.
Berücksichtigen Sie die im Bild Nr.1 dargestellte Stabspannweite ASTM A992 W 18 × 50 und die gleichmäßigen Eigen- und Nutzlasten. The member is limited to a maximum nominal depth of 18 inches. The live load deflection is limited to L/360. The beam is simply supported and continuously braced. Verify the available flexural strength of the selected beam, based on LRFD and ASD.
A closely coiled helical spring is loaded by a compression force. The spring has middle diameter D, wire diameter d, and it consists of i turns. Die Gesamtlänge der Feder ist L. Determine the total deflection of the spring for the member model and one‑turn deflection for the solid model.
Ein leicht geneigter Stab wird durch konzentrierte Kraft belastet, an einem Ende von einer Feder gehalten und am anderen Ende gelagert. Assuming large deformations and neglecting the member's self-weight, determine its maximum upward deflection.
A member with the given boundary conditions is loaded by torsional moment and axial force. Neglecting its self-weight, determine the beam's maximum torsional deformation as well as its inner torsional moment, defined as the sum of a primary torsional moment and torsional moment caused by the normal force. Vergleichen Sie diese Werte, während Sie den Einfluss der Normalkraft annehmen oder nicht berücksichtigen. The verification example is based on the example introduced by Gensichen and Lumpe.
Ein I-Profil-Kragträger ist am linken Ende gelagert und durch Moment belastet. The aim of this example is to compare the fixed support with the fork support and to investigate the behavior of some representative quantities. Comparison is also made to the solution by means of plates. Small deformations are considered, and the self-weight is neglected. Determine the rotation in the midpoint of the cantilever, and in case of the member entity with warping, determine the values of the primary torsional moment, the secondary torsional moment, and the warping moment both on the left end (point A) and the right end (point B).