Registrieren Sie sich für das Dlubal-Extranet, um die Software optimal nutzen zu lassen und ausschließlichen Zugriff auf Ihre persönlichen Daten zu haben.
A thin rectangular orthotropic plate is simply supported and loaded by uniformly distributed pressure. The directions of axes x and y coincide with the principal directions. Bestimmen Sie maximale Durchbiegung der Platte, ohne das Eigengewicht dabei zu berücksichtigen.
Eine elliptische Platte mit eingespanntem Rand wird einer gleichmäßig verteilten Querlast ausgesetzt. Assuming the small deformation theory and neglecting the self‑weight, the maximum out‑of‑plane deflection of the plate is determined.
Eine einfach gelagerte gleichseitige Dreieckplatte wird mit einer gleichmäßig verteilten Querlast belastet. Assuming the small deformation theory and neglecting self‑weight, the maximum out‑of‑plane deflection of the plate is determined.
Dieses Beispiel dient zur Veranschaulichung der Ebene. The application is shown on a two-story structure. The structure is loaded by means of lateral forces according to Figure 1. Determine the maximum deflection of the structure ux in the direction of the loading forces using both the diaphragm constraint and the plate model of the floor.
Eine Verbundplatte, die aus drei Glasschichten einer Folienschicht und einem Innenraum mit trockener Luft besteht, ist vollständig befestigt und mit einer variablen Temperatur belastet. Neglecting its self-weight, determine the plate's maximum deflection.
A timber beam reinforced by two steel plates at the ends is loaded by pressure. The wood fibers are parallel to the upper loaded side of the beam. Die plastische Oberfläche wird nach der Tsai-Wu-Plastizitätstheorie beschrieben.
Bestimmen Sie die maximale Durchbiegung des Kragarms aus zwei Glasscheiben und einer dazwischenliegenden Folienschicht. The plate is fully fixed at one end and subjected to uniform pressure.
Ein I-Profil-Kragträger ist am linken Ende gelagert und durch Moment belastet. The aim of this example is to compare the fixed support with the fork support and to investigate the behavior of some representative quantities. Comparison is also made to the solution by means of plates. Small deformations are considered, and the self-weight is neglected. Determine the rotation in the midpoint of the cantilever, and in case of the member entity with warping, determine the values of the primary torsional moment, the secondary torsional moment, and the warping moment both on the left end (point A) and the right end (point B).
Eine geschichtete quadratische orthotrope Platte ist in ihrem Mittelpunkt vollständig befestigt und einem Druck ausgesetzt. Compare the deflections of the plate corners to check the correctness of the transformation.
A timber beam reinforced by two steel plates at the ends is loaded by pressure. The wood fibers are parallel to the upper loaded side of the beam. Die plastische Oberfläche wird nach der Tsai-Wu-Plastizitätstheorie beschrieben.
Eine breite Platte mit Öffnung wird mittels Zugspannung in einer Richtung belastet. The plate width is large with respect to the hole radius, and it is very thin, considering the state of the plane stress.