Registrieren Sie sich für das Dlubal-Extranet, um die Software optimal nutzen zu lassen und ausschließlichen Zugriff auf Ihre persönlichen Daten zu haben.
Kelvin-Voigt Materialmodell besteht aus der linearen Feder und dem viskosen Dämpfer, die parallel geschaltet sind. In diesem Verifikationsbeispiel wird das Zeitverhalten dieses Modells während der Belastung und Relaxation in einem Zeitintervall von 24 Stunden getestet. Die konstante Kraft Fx wird für 12 Stunden aufgebracht und die restlichen 12 Stunden ist das Materialmodell lastfrei (Relaxation). Bewertet wird die Verformung nach 12 und 20 Stunden. Zeitverlaufsanalyse mit der linearen impliziten Newmark-Methode.
In den verfügbaren Normen wie EN 1991-1-4 [1], ASCE/SEI 7-16 und NBC 2015 sind Windlastparameter wie der Winddruckbeiwert (Cp) für Grundformen aufgeführt. Wichtig dabei ist, wie Windlastparameter schneller und genauer berechnet werden können, anstatt mit zeitraubenden und teilweise komplizierten Formeln in Normen zu arbeiten.
A sphere is subjected to a uniform flow of viscous fluid. Die Geschwindigkeit der Flüssigkeit wird als unendlich betrachtet. The goal is to determine the drag force. The parameters of the problem are set so that the Reynolds number is small and the radius of the sphere is also small, thus the theoretical solution can be reached - Stokes flow (G. G. Stokes 1851).
Eine Membran wird anhand isotroper Vorspannung zwischen zwei Radien von zwei konzentrischen Zylindern gedehnt, die nicht in einer Ebene parallel zur vertikalen Achse liegen. Find the final minimum shape of the membrane - the helicoid - and determine the surface area of the resulting membrane. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.
A cantilever is loaded by a transversal and an axial force on the right end and is fully fixed on the left end. Das Problem wird durch folgenden Parametersatz beschrieben. The problem is solved by using the geometrically linear analysis, second-order analysis, and large deformation analysis.
A long, thin beam is carrying a concentrated mass and is loaded by a time-dependent force. Er wird einfach gelagert. The problem is described using the following parameters. Determine the deflections in the given test times.
A timber beam reinforced by two steel plates at the ends is loaded by pressure. The wood fibers are parallel to the upper loaded side of the beam. Die plastische Oberfläche wird nach der Tsai-Wu-Plastizitätstheorie beschrieben.
Bestimmen Sie die maximale Durchbiegung von vier unten befestigten Stützen, die oben durch einen starren Block verbunden sind. The block is loaded by pressure and modeled by an elastic material with a high modulus of elasticity. The outer columns are modeled as orthotropic elastic material, and the inner columns as orthotropic elastic-plastic material with the same elastic parameters as the outer columns and plasticity properties defined according to the Tsai-Wu plasticity theory.
A timber beam reinforced by two steel plates at the ends is loaded by pressure. The wood fibers are parallel to the upper loaded side of the beam. Die plastische Oberfläche wird nach der Tsai-Wu-Plastizitätstheorie beschrieben.