With Pulleys, you can define the parameters for pulley wheels. They are relevant for the member type Cable on pulleys when a cable system with pulleys or a pulley system is modeled. The parameters are used to generate new cable members at the corresponding distances, connected to rigid members at the center of the pulley by nodal releases.
Pulley Wheel Parameters
Enter the outer diameter of the pulley wheel.
Pulley Wheel Losses
Guiding the cable over a pulley is associated with force losses that can be represented in the model. The 'Pulley losses' list provides the following options:
- None: No pulley wheel losses are taken into account.
- Axis friction: Friction losses occur in the axis. Enter the axis friction coefficient μ and the axis diameter d.
- Efficiency: The pulley has a specific efficiency factor. Enter the ε value of the efficiency. For a pulley system, for example, this value is often between 0.70 and 0.95, depending on the number of pulleys and the support.
Options
Usually, the cable is conventionally guided directly over the pulley. If the cable has a crossed course, activate the 'Use reversed pulley' check box.